Skip to main content
Set Up a Tunnel
Updated over a week ago

Follow the steps in this article if your POS requires the creation of a tunnel.

Step 1. Log in to the Deliverect account you want to create the tunnel for. In the sidebar, select Settings and then Keys .


Step 2. Select the Download client button to download the software needed for the tunnel.


Step 3. Select the + Create tunnel button.


Step 4. Choose the location from the dropdown and select the Create button.


Step 5. The POS URL and Client key are now displayed. Make a note of them or leave this screen open.


Step 6. Install the client that you downloaded in Step 2. You will be asked for the following:

  • Token: Enter the Client key.

  • Port: Enter the port that is used by your POS.

  • Protocol: Choose the correct protocol for your POS. If you are unsure, contact our support team.

Select the Next button once ready.

After installation, the installer should open localhost:4040 in your browser with requests being shown.


Step 7. Go to the Locations page and select the Edit button for the location .

Unable to edit your location? Reach out to our support team for assistance.


Step 8. Enter the POS URL (from Step 5.) into the POS Server Endpoint (or similar) field. Select the Save button.

Did this answer your question?